compatible with the following models:

DUCATI HC812 ( 812/96-812/00-812/03- 812/300-812/400)

DUCATI HC818-819

DUCATI HC418 -HC312 -HC412

Alferd Schellenberg  60400 / 60401 

Alferd Schellenberg  60810

Chamberlain HC250-433  HC250  

Chamberlain  LIFTMASTER WGO 200-433 WGO300 

FRANCE DOMOTIQUE 888 

DOMOPASS 812    

CONFORMATIQUE GATE3000-  SOLAR GATE 30000- HC818-819

Pair of charbon brushes

Model suitable for all motors: gate openers, sliding gate openers and garage opener

weight Kg: 0,1

DUCATI HC312

Produced in over 2 million pieces, it is a very reliable classic product over time.

Gray painted aluminum tube. Black gear motor body.

Manual release with key.

The actuator is pre-wired with 1m of H05RNF cable,
Fixing brackets (art. R8) and release key (art.R15) are not supplied with the actuator, but can be purchased separately.

• Continuous operation.
• Low consumption: 50W max.
• Maximum thrust: 800N.
• Operating temperature: -15° C / + 50° C.

COMPATIBLE WITH MODEL KITS:

• FRANCE DOMOTIQUE 888
• DUCATI  HC 812/96
• DUCATI  HC 812/03
• DUCATI  812/300
• DUCATI  812V Roll
• DUCATI  812 roll
• Allducks 812
• VIAL MENUISERIES 812
• Alfred schellenberg 60400/401
• Alfred schellenberg 60810
• CHAMBERLAIN HC250
• DOMOPASS 812

DUCATI HC412

12V low voltage actuator with telescopic piston
stroke 400 mm for gates with leaf max. 3.5m wide / 350Kg

Produced in over 2 million pieces, it is a very reliable classic product over time.
Gray painted aluminum tube. Black gear motor body.
Manual release with trefoil key.
The actuator is pre-wired with 1m of H05RNF cable, fixing brackets (item R8) and release key (item R15) are not supplied with the actuator, but can be purchased separately.
Continuous operation.

• Low consumption: 50W max.
• Maximum thrust: 800N
• Operating temperature: -15 ° C / + 50 ° C

COMPATIBLE WITH MODEL KITS:

• DUCATI HC 812/96
• DUCATI HC 812/03
• DUCATI 812/400
• PROTOP DUCATI
• CHICAGO GATE OPENER by DUCATI

• 12V or 24V version available (24V version is recommended for heavy gates and SOFT STOP options)
• Integrated limit stops are availables for easier installation in "FC" version
• With 400 mm stroke  this actuator is ideal to be installed on small gates with small pillars
• This electromechanical irreversible actuator comes with 1m outdoor use cable H05RN-F 2 x 1mmq; set of fixing brackets and unlocking key for emergency manual release
• Vintage design with unsurpassed reliability
• Massive motor-gear unit for reliable power transmission
• Actuator can be installed either on the right or on the left of the gate 
• Ideal for intensive use in any climate
• The gate keeps automatically locked.The self-locking properties of the spindle increase the protection against a dangerous and unauthorised “pressing” of the gate and the otherwise necessary elecktro-locks for the final positions can be omitted for gates up to 2,5 m
• The HC actuators are nowadays developement of the original and countless imitated project dated 1986, made by Lorenzo Ducati, a pioneer in gate automation
• 2 years warranty. 
• Color:  black (special color edition 2016).Previous  versions came in black and gray color version, no more availables.

CONTROL BOARD COMPATIBILITY

12V version actuator is compatible to all DUCATI's 12V swing gate opener control boxes 

24V version actuator is compatible to all DUCATI's 24V swing gate opener control boxes 

Weight Kg: 2,0

Stainless steel tube with front guide(R37)  for telescopic actuator 300 mm stroke.

Total lenght 51,5 cm

Compatible with HC312 actuator

Weight Kg: 0,5

Plates assembly set H et K and release key for HC-418

Box with transfer for CTR35- CTR35/S- CTR42 - CTR42/S